Journeyman Electrician Construction - Prudhoe Bay, AK

Job Purpose

This is a remote/ rotational position in Prudhoe Bay, AK. The typical schedule is 84 hours per week (40 hours straight time and a minimum of 44 hours at time and a half). Installs, maintains, and repairs electrical systems, equipment, wiring and controls in a petrochemical environment.

All meals and lodging are provided by Worley while the employee is on location. Transportation between Anchorage and Prudhoe Bay is provided.

Worley offers a competitive benefits package, with company paid short-term disability, life insurance, and 4.5% employer match on 401k.

External Description

Our Journeymen Electricians:

Responsible for maintenance, troubleshooting, repair, installation and construction of industrial electrical equipment and systems found in an industrial or commercial environment through the proper use of standard wire, MC-HL cable, conduit, fittings and hardware commonly found in industrial plants

Read and understand wiring schematics, design drawings, and specifications

Responsible for use and care of the tools and equipment commonly employed in industrial construction such as

hydraulic/electric conduit benders, knockout punch sets, cable pullers, meggers, hi-pot equipment, volt meters, multitesters and ammeters

Set and secure electrical distribution equipment including switchgear, transformers, motor control centers, power panels and instrument and control junction boxes

Install power, control and instrumentation circuits ranging from 24V DC up to 13.8KV

Bend, cut, thread and install conduit

Install and terminate wiring

Check out and troubleshoot simple electric circuits and electrical devices and machinery

Accountable for testing, troubleshooting, installing power distribution and motor control circuits

Mentor apprentices with the intent of creating competent future journeymen not only in the electrical trade, but also in the Worley safety culture

Participate in daily and weekly Tool Box meetings

Knowledge, Skills, Ability:

Possesses current Alaska State Journeyman Electrician license, has fitness card and an understanding of organizational practices

Basic understanding of electrical circuits including the operation and function of typical electrical devices and machinery such as solenoids, relays, motors, transformers, switches, motor control centers, generators, batteries and lighting systems

Possess an excellent knowledge of the National Electric Code

Must be able to follow all company, client, safety and regulatory requirements, including, but not limited to, policies,

procedures, standards and guidelines as they relate to this position and the work duties being performed

Have adequate written and oral communications applicable to standards set by organization

Physical Demand/Work Environment:

The physical demands described here are representative of those that must be met by an employee to successfully

perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with

disabilities to perform the essential functions. While performing the essential functions of this job, the employee must have ability to stand, walk on level, uneven and slippery surfaces; sit, squat, kneel, reach through low and high ranges and exhibit normal balance and coordination.

These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear.

Lift 40 lbs from floor to knuckles x 2 with a 12 second interval

Lift 40 lbs from floor to waist x 2 with a 12 second interval

Lift 12 lbs from floor to above head/crown level with a 12 second interval

Repetitively lift 30 lbs from floor to knuckles x 10 self-paced but continuous with 12 second intervals between each lift

Carry Test: Carry 40 lbs with two hands for 50 feet x 2; self-paced, but continuous; (allow a 60 second rest break

between carry tests, i.e. after 50 feet.)

Climb Stairs: Climb up and down 12 steps x 10 for a total of 120 steps; self-paced, but continuous, (allow 60 second rest breaks after each up and down climb of 40 steps)

Lift, Carry and Climb: While carrying 35 lbs in one hand and holding onto a railing with the other hand for safety, walk up and down 12 steps x 2 for a total of 24 steps; self-paced but continuous, (allow 60 second rest break 12 steps up and down.)

Slanted Ladder: Climb up and down 15 rungs x 6 for a total of 90 rungs (allow a 60 second rest break after climbing up and down each set of 30 rungs)

Repetitive Stoop Test: Perform from standing position, bend forward at waist as far as possible without bending the knees with hands reaching toward the floor x 5, self-paced, but continuous.

Repetitive Kneel Test: Perform from standing, kneel on one knee, and alternate from left to right knee, x 5 each knee

Repetitive Squat Test: Perform a functional squat and stand x 5

Twist and Flex Test: Perform from standing alternate toe touches x 5 to each side to assess ability to twist and flex the trunk repetitively